9ENG8008 GFM436 User Manual
Appendix G – Non-EX Safety Critical Information- 98
22 Appendix G – Non-EX Safety Critical Information
The power supply provided with this product accepts 100-240V AC, 50-60 Hz, 200-400mA. Its output is 9V DC,
2000mA. The power supply must not be exposed to moisture or liquids. During charging the charger is considered a
disconnect device and must remain accessible at all times.
This product can work in a relative humidity of 15 to 90%.
This product can work in a pollution degree of 1, 2, 3, or 4. The product can be used outdoors and in wet
environments.
When operating this product appropriate PPE must always be used, and applicable site regulations must be
followed.
If this equipment is used in a way not specified in this manual, the protection provided by the equipment may be
impaired.
The manufacturer’s address is:
Gas Data Ltd.
Unit D
Earlplace Business Park
Coventry
CV4 9XH
UK
To Next Page
Loading...