GA600AC Sliding Gate Opener User Manual
Example Sliding Gate
If you need any gate accessories, please contact the authorized dealer.
Gate Track and Track Wheel Gate End Catch Gate Guide Rollers Gate Stop
Figure 4
Please ensure that the gate opener power cable is not plugged in at any stage before Step 9.
Step 1 - Gate Preparation
· Ensure that the sliding gate is correctly installed.
· The gate is horizontal and level and the gate can glide back and forth smoothly when moved by
hand before installing the gate opener.
· Wheels and guide rollers should rotate easily and be free from dirt or grime.
· Track should be flat, level and firmly affixed.
· Any misalignment in the gate will affect performance of the automatic gate opener.
Figure 5
The gate should slide smoothly by hand before attempting to install the gate opener.
To Next Page
Loading...
