GAUI NX4 - Electronlcs Mount; Canopy Post Assembly

M3x10
M3x10
M3x6
M3x6
M3x6
M3x6
M3x6
M3x6
M3x6
M3x6
M3x6
M3x6
M3x6
M3x12
M3x6
M3x6........................x5
Electronics mount
M3x10......................x2
ڿۢ৵
ᖴ๜ჭб
Countersunk Washer
ಣ၇)ᑼဌМ࢙*Ӓ஡N4y23ᖴ๜ᚈΤ
М࢙ϲȂӶٻңޣ৸3пίޠ༬ූඩΤ
ЍϲٯఌᆨᑼဌМ࢙Ȅ
When assembling the canopy posts, fix
the M3x12 screw inside the post, use a
2mm hex screwdriver as a tool to tighten
the canopy posts.
GAUI
TAI SHIH HOBBY CORPORATION
GAUI
TAI SHIH HOBBY CORPORATION
Electronlcs mount
Canopy post assembly
Ⴌᡑ࢝ಣ၇
ᑼဌМ࢙ಣ၇
4
M3x6........................x7
M3x12......................x1
ᖴ๜ჭб
Countersunk Washer
ᖴ๜ְሰαЦྥᏙ
All screws on side plates should
be applied with thread lock.
ᖴ๜ְሰαЦྥᏙ
All screws on side plates should
be applied with thread lock.