GAUI NX4 - Clutch Bell Assembly

B5x11x4
B8x14x4
When assembling the starter shaft and
Hex coupler you must tighten the M4x4
screws to ensure smooth operation of the
starter shaft.
M4x4
M4x4
Hex coupler for starter shaft
B5x11x4
Starter shaft
Use AB glue to fix the clutch bell liner inside Clutch bell
M3x6
M3x6
M3x6
M4x4.......................x2
Bearing 5x11x4.......x2
Bearing 8x14x4.......x2
ః୞ໆఝ
ٻңBCᘈ຀Ꮩ஡ٿцбᆨஞᘈӬܼᚕӬᏣဌαȄ
ః୞ໆఝᓟ
Starter shaft bearing mount
ః୞ໆໆܜ৵
ಣ၇ః୞ໆఝᓟଡ଼҇ᚈᆨN5y5ᖴ๜Ȃٯ
ߴࡼᙾ୞໸ᄲȄ
Clutch bell liner 10x123mm
ᚕӬᏣٿцб21y234nn
Clutch bell cover
ᚕӬᏣဌ
M3x6........................x3
GAUI
TAI SHIH HOBBY CORPORATION
GAUI
TAI SHIH HOBBY CORPORATION
Clutch bell assembly-1
Clutch bell assembly-2
ᚕӬᏣဌಣ၇.2
ᚕӬᏣဌಣ၇.3
5
ᖴ๜ְሰαЦྥᏙ
All screws should be applied with
thread lock.
ᖴ๜ְሰαЦྥᏙ
All screws on side plates should
be applied with thread lock.