GAUI NX4 - Engine Assembly; Engine Bracket Mount Assembly; All Screws on Side Plates Should

GAUI
TAI SHIH HOBBY CORPORATION
GAUI
TAI SHIH HOBBY CORPORATION
Engine assembly
Engine bracket mount assembly
Жᔞಣ၇
Жᔞڿۢ৵ಣ၇
8
M3x8
M3x8
M3x6
M3x6
ᖴ๜ჭб
Countersunk Washer
Жᔞڿۢ৵
Engine mount bracket
M3x6........................x2
M3x8........................x2
஡Жᔞಣ၇Վᐡٙαٯݨཏಣ၇ႇโሰ።ᐍِ࡚ԄშұȄ
Install assembled engine onto the main frame.
You need to tilt the engine slightly to put it in place.
ᖴ๜ְሰαЦྥᏙ
All screws on side plates should
be applied with thread lock.
IMPORTANT: At this time, please leave
these M3x8 bolts loose at ` this time.
將M3x8螺絲含上不鎖緊並配合P.10調整離
合器罩轉動順暢，再將M3x8螺絲鎖緊。