Expert Pro User Manual
Installation 2-17
Step 1:
Connecting your GCC cutter
1. Turn on the machine.
2. Connect the USB connector to the machine and then USB driver will
installed automatically. It will take a few minutes to find the device.
Please DO NOT disconnect the USB cable until the installation has
completed.
3. You can double click the USB icon on the taskbar to make sure the
USB device is detected.
Step 2:
Installing the software
(1) Put the installation CD into your CD-ROM. Please make sure that the
USB device is connected before you start the driver installation.
(2) Choose the model you want to install from the driver list and click on
Win 8/ 7/ Vista/ XP Driver (Manual Selection) or Win 8/ 7/ Vista/ XP
Driver (Automatic detection) to start installing the Driver and AAS
plugin.
To Next Page
Loading...
