GCC Technologies LaserPro C180 - Page 63

LaserPro C180 User Manual
57
• History File: This section contains a list of the recent les you have recently created and worked
with.
• SAVE: This function will save current print driver parameter settings to a le under the specied
location on your computer. (Saved parameter setting les will be tagged with the “.C18” extension)
• LOAD: This function allows you load previously saved print driver parameters or LaserPro
parameter database.
• ORIGINAL: This function will load the print driver’s original factory parameter settings.
• SAVE TO DEFAULT: This function allows you to save your current print driver parameters as the
default startup settings.
• DELETE: This function will delete the le you select from the History File section. Please note the
delete function only removes the le from the history le section, it does not remove the .H
2O le
from your hard drive, if you wish to completely remove the le from your hard disk, and you will
have to manually delete the le from your operating system.)
NOTE
If you are using Windows 2000 or XP as your operating system, then make sure you log
in with an administrator or administrator-rights account in order to properly save laser
parameter settings.
Tip
LaserPro material database settings allow you easy to load the several
parameters. If you are loading LaserPro parameter database as your
operating parameter, please direct load from several build-in parameter folders.