GCC Technologies PII-60 - Chapter 1 Parts Names and Functions; Front View

Chapter 1 Parts Names and Functions
1.1 Front View
Platen: The surface fo
r
holding and supporting
media during cutting.
Cutting Pad: Provides
protection for the blade
while the blade is cutting
Alignment Ruler: Media
can be aligned with the
clear guide line marks
Cutting Carriage: This
unit performs the cutting
with the installed blade and
pen.
Grid Drum: Moves the
media back and forth
during operation.
Control Panel: Consists of
10 control keys and 6 LEDs
Knife Guide: To cut of
f
the extra media easily
along this groove.
Pinch Roller: Press the
media against grid drum
during cutting.
Paper
Sensor: The
Sensor detect
the presence
of media.
Figure 1-1 Front view of Puma II
Puma II users manual 1-1