GE 31591 - Network and Software Management; Network settings

Network settings
56



IMPORTANT:

network administrator or service provider before making any changes to the
network settings.
Viewing your network settings
1. Press the Menu softkey.
2. Press
/
redial
or / to select Settings, and then press the Select softkey.
3. Press
/ to select Network, and then press the Select softkey.
4. Press
/ to select Information, and then press the Select softkey.
5. View the information, and then press the OK
DHCP

address, DHCP will be deactivated. You can reactivate DHCP.
Activating DHCP:
1. Press the Menu softkey.
2. Press
/
redial
or / to select Settings, and then press the Select softkey.
3. Press
/ to select Network, and then press the Select softkey.
4. Press
/ to select TCP/IP, and then press the Select softkey.
5. An activation message is displayed. Press the OK
6. Your IP address is displayed and the new setting is saved.
Network settings