DescriptionPart
Port for column position 1, bottom of column5
Port for column position 1, top of column6
Port for column position 2, bottom of column7
Port for column position 2, top of column8
Pressure sensor just inside the outlet9
Outlet, to the next module10
Function
The column valve module consists of a number of membrane valves to control the flow
path, and two integrated pressure sensors to monitor the pressure over the columns.
The illustrations below show schematic flow paths inside the column valve module (left),
and a list of options (right). This list is located in the Column valve dialog box accessible
from the Process Picture.
The positions marked P in the left illustration below indicate the pre-column and post-
column pressure sensors.
48 ÄKTA pilot 600 User Manual 29274559 AA
3 Description of modules
3.8 Column valve
To Next Page
Loading...
