ActionStep
In the New Method dialog box, select Intelligent Packing from the Predefined
Method list. Click OK.
2
Result: A new method based on the predefined Intelligent Packing method
is created and opened.
Verify the method settings. Make sure that Column position and Default
curve to show are correct.
3
Tip:
For information about the settings, click on the Phase Properties tab and
then press F1.
Note:
Text editing in Method Settings or the Intelligent Packing phase of an intel-
ligent packing method is not recommended.
Click on the Intelligent Packing phase.4
78 ÄKTA pilot 600 User Manual 29274559 AA
4 Operation
4.3 Intelligent packing
To Next Page
Loading...
