GE AKTA pilot 600 - Page 94

InstructionsMaintenance action
See the ÄKTA pilot 600 Operating
Instructions
Run System CIP (System cleaning-in-place)
See the ÄKTA pilot 600 Operating
Instructions
Sanitize the instrument
See the ÄKTA pilot 600 Operating
Instructions
Clean and store the pH electrode
Section 5.3.1 Clean the conduc-
tivity flow cell, on page 96
Clean the conductivity flow cell
Section 5.4.2 Calibrate the con-
ductivity monitor, on page 104
Calibrate the conductivity monitor
Section 5.4.1 Reset the pressure
sensors, on page 101
Reset pressure sensors
See the ÄKTA pilot 600 Operating
Instructions
Replace tubing and connectors
Section 5.5.3 Replace the UV
monitor flow cell, on page 114
Replace the UV flow cell
See the ÄKTA pilot 600 Operating
Instructions
Replace pump rinsing system tubing
See the ÄKTA pilot 600 Operating
Instructions
Replace mains fuses
Chapter 6 Performance tests, on
page 119
Run performance tests
94 ÄKTA pilot 600 User Manual 29274559 AA
5 Maintenance
5.2 Maintenance schedule