CARESCAPE Monitor B850
98
2106778-001
4. Select Next.
The selected Software activation window appears.
5. According to the software you are activating, proceed to:
• Activating host software immediately
• Activating host software after next case end / discharge
• Activating module software
• Activating EMBC or UIC software
Activating host software immediately
Before you start:
• Make sure the patient monitor is in a case reset / patient discharged state.
1. In the Host Software window, verify that the software you are activating is listed as
Inactive in Current Software State.
2. In Software License, if applicable, enter the Activation Code for the new software
version.
3. In Software Activation, select
Immediately.
To Next Page
Loading...
