Use only breathing tubes that comply with EN12342 or
ISO 5367 on this system.
A malfunction of the medical gas central supply system
may cause all connected devices to stop.
All gases supplied to the system must be medical grade.
Use of non-medical grade gases could result in
equipment damage.
Do not modify this equipment without authorization from
the manufacturer. Unauthorized modifications could
result in damage to the equipment and/or cause patient
injury.
If an external pressurized pipeline gas source is not
capable of supplying the peak gas flow and continuous
gas flow, the ventilator may not be able to achieve the full
range of ventilation settings.
See "System information" in the "Introduction" section for information
on specific monitoring requirements.
•
•
•
•
•
8 Setup and connections
2076152-001 8-3
To Next Page
Loading...
