GE Carestation 650 A1 - Using Flow Controls; Using the O2 Flush Button

AC.24.022
Figure 2-8 • Brake on four casters
Using flow controls
The flow controls regulate the amount of gas flow to the breathing
circuit. The System switch must be On for the gas to flow.
1. Turn the knob counterclockwise to increase gas flow.
2. Turn the knob clockwise to decrease gas flow.
Using the O2 flush button
The O2 flush button supplies a high flow of O2 to the breathing
system.
1. Push the O2 flush button to deliver a high flow of O2.
2. Release the O2 flush button to stop the delivery of a high flow of
O2.
2 System controls and menus
2076152-001 2-7