GE Carestation 650 A1 - Page 8

8 Setup and connections
Setup safety ......................................8-2
Moving and transporting the system ...................8-4
Connecting the breathing system .....................8-5
Setting up the absorber canister ......................8-6
When to change the absorbent ....................8-7
Removing absorber canister ......................8-7
Filling the reusable absorber canister ...............8-8
Circuit O2 cell installation .......................... 8-11
Electrical connections .............................8-14
Mains inlet ...................................8-14
Equipotential stud ............................. 8-14
Outlets ......................................8-14
Serial port ................................... 8-15
Pneumatic connections ............................8-16
Pipeline inlets ................................ 8-16
Scavenging .................................. 8-16
Scavenging a gas monitor sample flow ............ 8-17
Sample gas return port .........................8-17
Suction control panel ...........................8-18
Vacuum suction regulator (optional) ...............8-18
Venturi suction regulator (optional) ................8-19
Auxiliary O2 flowmeter (optional) ................. 8-20
Auxiliary O2+Air (optional) ...................... 8-20
Third cylinder supply (optional) ...................8-21
Installing gas cylinders ............................ 8-22
Cylinder cover ................................8-22
Installing cylinders with pin indexed yokes ..........8-22
Installing cylinders with DIN connections ...........8-23
Installing large cylinders ........................ 8-23
Performing a high-pressure leak test .............. 8-23
Passive AGSS ...................................8-24
Carestation
™
620/650/650c (A1)
vi 2076152-001