GE CB Watch 3 User Manual

CB Watch 3 User Manual v6.3 - May 2019 Page 16 of 100
Software version
Please note that this User Manual assumes that the firmware/software version being
used is at least:
Version 4.0 or above
And therefore, the HMI screen shots and some of the features described in this manual
reflect what is available in this latest version. Please refer to an older version of the User
Manual if there are discrepancies with what is described here.
Changing Passwords
Passwords can be changed for each username access level by:
- Logging in at the desired access level
- Going to the System / Product Info page
- Entering the current password for that access level
- Entering twice the new password that you want to set
- Pressing change
HMI: System / Product Info
Figure 15 – Changing password
Please take good note of any new password after your change.

GE CB Watch 3 Specifications

General

Brand	GE
Model	CB Watch 3
Category	Measuring Instruments
Language	English