GE Druck ADTS 2 Series - Page 48

Druck ADTS 2XX User Manual 36
K0451 Issue No. 1
UNITS
This group of commands is used for setting the units of measurement.
UNITS:AER
Command Syntax
UNITS:AERonautical <units>
Parameter Type: DISCRETE
Parameter Range: FTKNTS | FTMPH | MKPH(M/S) | MKPH(M/MIN)
Function: Sets the aeronautical units used for SCPI commands and queries.
Conditions: None
Query Syntax
UNITS:AERonautical?
Parameter Type: None
Parameter Range:
Returned Data <units>
Returned Data Type: DISCRETE
Returned Data Range: FTKNTS | FTMPH | MKPH(M/S) | MKPH(M/MIN)
Function: To query the SCPI aeronautical units.
Conditions: None