GE Druck ADTS 2 Series

37 Druck ADTS 2XX User Manual
K0451 Issue No. 1
UNITS:PRES
Command Syntax
UNITs:PRESsure <units>
Parameter Type: DISCRETE
Parameter Range: MBAR, INHG, PSI, MMHG, KPA, HPA
Function: To set the pressure units used for SCPI commands and queries. The display
only shows these units when SOUR:PRES or SOUR:RATE is sent.
Conditions: None
Query Syntax
UNITs:PRESsure?
Parameter Type: None
Parameter Range:
Returned Data <units>
Returned Data Type DISCRETE
Returned Data Range: MBAR, INHG, PSI, MMHG, KPA, HPA
Function: To query the SCPI pressure units.
Conditions: None