12 - [EN] English
K405 Issue 3
Figure 14: Example configuration - To measure pressure
and temperature
Operation - Error indications
If the display shows <<<< or >>>> :
•
Make s
ure that the range is correct.
• Make sure that all the related equipment and
connections are serviceable.
Maintenance
This section gives procedures to maintain the unit in a
good condition. Return the instrument to the
manufacturer or an approved service agent for all repairs.
Do not dispose of this product as household waste. Use an
approved organisation that collects and/or recycles waste
electrical and electronic equipment.
Maintenance - Clean the unit
Clean the case with a moist, lint-free cloth and a weak
detergent. Do
not use solvents or abrasive materials.
Maintenance - Replace the batteries
To replace the batteries, refer to B1. Then re-attach the
cover.
Make sure that the time and date are correct. The
calibration facility uses the date to give service and
calibration messages.
All the other configuration options stay in memory.
Settings
B1
To Next Page
Loading...
