– 23 –
To remove the bulb receptacle/bracket assembly:
1. Disconnect the bulb receptacle connector.
Connector
2. Lift and remove the bulb receptacle/bracket
assembly.
3. Remove the Phillips-head screw securing the
bulb receptacle to bracket.
4. Using gloves or a cloth, pull the bulb straight
out of its receptacle.
Bulb Receptacle
Bulb
Power Saver (Energy Saver)
The timekeeping device that keeps the clock running
needs to be recharged every few days.
It is recommended that once a week the microwave
oven be left powered on by not using the Power
Saver (Energy Saver) feature for at least 24 hours.
If prompted to enter the time of day when powering
the microwave oven on from the Power Saver (Energy
Saver) mode, the microwave oven should have been
powered on for at least 48 hours.
When the microwave oven is fi rst installed, it should
be powered on for at least 48 hours.
Some features, such as the auto night-light, will not
function when the microwave oven is in Power Saver
mode.
light
vent
power saver
(Continued next page)
To Next Page
Loading...
