4-42 F650 Digital Bay Controller GEK-106310AB
4.2 HUMAN MACHINE INTERFACE (HMI) 4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
4
One example of data screen for actual values is shown in Figure 4–22:.
First Line: Header of last level in actual values (Phase Current in the example)
Second Line: Data identifier (in the example PH IOC1 HIGH A, is the pickup signal for the first instantaneous
overcurrent function level high for phase A).
Third line: Status of the displayed actual value.
Fourth Line: Relative position in the menu (it is the first value of 114)
Figure 4–22: ACTUAL VALUES SCREEN DATA
In the Actual Values menus are different types of data, each type of data will display its particular status type (on and off, 0
or 1, ok or fail, analog values, etc.)
Phase Current
PH IOC1 HIGH A PKP
OFF
(1/114)
To Next Page
Loading...
