GEK-106310AB F650 Digital Bay Controller 7-15
7 IEC 61850 PROTOCOL 7.2 IEC 61850 PROFILE FOR F650
7
2 PICS (“Protocol Implementation Conformance Statement”)
The tables in sections below appear in the same sequence as in standard IEC 61850-8-1, section 24.
The tables refer to part 7 of the standard and the corresponding information must be contained in the PICS.
2.1 Notation
For the following clauses, these definitions apply:
• Y: The item is implemented.
• N: The item is not implemented.
• x: excluded. The implementation shall not implement this item.
• i: out-of-scope. The implementation of the item is not within the scope of this standard.
• F/S: Functional Standard. Should be applied.
• Base: Shall be applied in any application claiming conformance to this standard.
2.2 Profile conformance
The following tables define the basic conformance statement.
2.2.1 PICS for A-Profile support
Time (Clause 5.5)
T1 Time resolution of internal clock 10 Nearest negative
power of 2 in
seconds
T2 Time accuracy of internal clock T0
T1
YT2
T3
T4
T5
T3 Supported TimeStamp resolution 10 Nearest value of
2**-n in seconds
according to
5.5.3.7.3.3 of Part
7-2
A-Profile
shortcut
Profile description
Client Server
Value/comment
realized realized
A1 Client/server A-profile N Y
A2 GOOSE/GSE Management A-profile Y Y Only GOOSE not GSE
management
A3 GSSE A-profile Y Y
A4 Time sync A-profile Y N
To Next Page
Loading...
