GEK-106310AB F650 Digital Bay Controller 9-5
9 BOOTCODE AND FIRMWARE UPGRADE 9.2 COMMUNICATION PARAMETERS
9
The new window (Figure 9–5:) will show all IP addresses configured in the PC.
Figure 9–5: IP ADDRESS FOR COMPUTER
In case no one the existing IP addresses and Subnet mask shown in Figure 9–5: does not match the actual relay LAN
pattern, click the Add button.
The new window (Figure 9–6:) allows to add a new address in the PC corresponding to the same relay LAN pattern.
Figure 9–6: NEW IP AND SUBNET MASK ADDRESSES FOR PC
Windows allows Multihosting, so it permits having as many IP addresses as desired. It is necessary to turn OFF and ON
the computer to activate the new address that has been assigned to the PC.
To Next Page
Loading...
