9-18 F650 Digital Bay Controller GEK-106310AB
9.3 FIRMWARE VERSION UPGRADE 9 BOOTCODE AND FIRMWARE UPGRADE
9
Figure 9–27: RELAY REBOOT STEP
6. Once the relay has been turned off and on, a new screen (Figure 9–30:) will require the firmware upgrade files
(“upgrade.txt”). Wherever from this Upgrade.txt file would be obtained (www.gedigitalenergy.com or from TS Dept. at
any GE Multilin facility), then it must be saved in some directory in the root drive or in the desktop of teh PC.
Figure 9–28: FIRMWARE FILE ACCEPTANCE
If the files are downloaded from the web, they are compressed in a zip file. Proceed to extract all files and save them in the
directory just created.
To Next Page
Loading...
