D
IRECTION 5813707-100, REVISION 2 VENUE GO™ SERVICE MANUAL
3-48 Chapter 3 - System Setup
PRELIMINARY
3-8-5 Export Configuration
The destination for Export of patient records to XML and MPEG must be configured prior to use. This
is done from the Dataflow screen.
3-8-5-1 Setup on the Remote Share
Required setup on the remote share:
1) Add user/password
2) Set Share permissions
3) Set Security permissions
NOTE: The User on the remote share must have all rights/permissions for the shared folder.
The default network user is predefined on Venue Go™
It is possible to set a secondary user if required by the remote share. For instructions, see: Configurable
Remote Path User on page 3 - 48.
NOTE: The default User / Password is always used as primary log in credential. No attempt is made to use the
secondary if log in succeeds using the primary.
3-8-5-2 Configurable Remote Path User
NOTE: The default User / Password is always used as primary log in credential. No attempt is made to use the
secondary user if log in succeeds using the primary.
NOTE: The configurable (secondary) user and password is used for all remote paths configurable throughout
the system as secondary log in credential.
NOTE: The User on the remote share must have all rights/permissions for the shared folder.
Follow these steps to set up a Secondary Remote Path User:
1) Log on as ADM.
2) Select Connectivity > Tcpip.
To Next Page
Loading...
