Diagnostics/Troubleshooting
7-32 LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
7-5-1-2 Wireless-LAN Network
NOTE: To configure the Wireless-LAN network, the operator must login
as administrator.
1. Connect the wireless adapter in the USB port.
2. Enter Utility-> Connectivity-> TCP/IP, press
Configuration.
Figure 7-24. Network Settings
3. Double click Wireless network. you chosen, or clink the
Connect at the left bottom of screen.
Figure 7-25. Wireless Network Conection
To Next Page
Loading...
