Replacement Procedures
8-6 LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
8-3-4 Backing up the Patient Archive and System Configurations
• Backup the Patient Archive and System Configurations.
For instructions, please see “Data Backup and Restore” in
the Basic User Manual/User Guide.
8-3-5 Restoring up the Patient Archive and System Configurations
• For instructions, please see “Data Backup and Restore” in
the Basic User Manual/User Guide.
NOTE: It is not suggested to manually delete the files in
D:\Idunn\target\resources\idunn\userdefs.
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from LOGIQ V3/V5/V5 Expert before doing
backup of the Patient Database.
Depending on the location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.
To avoid lacking of connecting to Local Archive, connecivity.res
and IPSave in D:\Idunn\target\resources\idunn\userdefs could
not be deleted. If they are deleted, please rewirte the serial
number.
To Next Page
Loading...
