Manual Overview
LOGIQ V3/V5/V5 Expert – Basic Service Manual 1-3
5726264-100 English Rev.8
1-2 Manual Overview
This manual provides installation and service information for the
LOGIQ V3/V5/V5 Expert Ultrasound system. It is divided in ten
chapters as shown below.
1-2-1 Contents in this manual
The manual is divided into ten chapters.
In the beginning of the manual, before chapter 1, you will find
the Revision overview, the Important precautions including
Translation policy, Damage in transportation, Certified electrical
contractor statement, Omission & errors, Service safety
considerations and Legal notes, and the Table of Contents
(TOC).
An Index has been included after Chapter 10.
Table 1-1: Contents in this manual
Chapter
number
Chapter title Description
1.
Introduction Contains a content summary and warnings.
2.
Site preparations Contains pre-setup requirements for the LOGIQ
V3/V5/V5 Expert.
3.
System Setup Contains setup procedure with procedure
checklist for the system.
4.
General Procedures
and Functional
Checks
Contains functional checks that must be
performed as part of the installation, or as
required during servicing and periodic
maintenance.
5.
Components and
Functions (Theory)
Contains block diagrams and functional
explanations of the electronics.
6.
Service Adjustments Contains instructions on how to make any
available adjustments to the LOGIQ V3/V5/V5
Expert.
To Next Page
Loading...
