7. Specifications
DMS 2 Operating Manual Page 177
7.2.2 Single Element Probes
Nominal Contact Measurement Temp.
Model Probe Description Frequency Diameter Range (Steel) Range Cable
A-2 DFR High Resolution Delay Line 15.0 MHz .30" Application <130°F C-604
7.6 mm Dependent <54°C
Alpha-DFR Delay Line 5.0 MHz .60" Application <130°F C-604
15.2 mm Dependent <54°C
CA211A Standard Contact 5.0 MHz .75" Application <130°F C-604
19.1 mm Dependent <54°C
NOTE:
Probe specifications are subject to change without notice.
To Next Page
Loading...
