Appendix C. Helpful Hints
DMS 2 Operating Manual Page 203
• An A-scan can be saved with a parameter set. Before
saving a parameter set, freeze the screen to store a
sample A-scan. When the P-Set is reloaded, the stored
(sample) A-scan will be displayed. Simply select FREEZE
OFF to UNFREEZE and return to normal operation.
NOTE: While recording in a Boiler type file, and measuring
ribbed tubes, pressing
when a “C” or “2” tube-position is
active allows the user to designate a series of data positions
into which OBST will be inserted. The user may then attach a
“RIBBED” comment to all obstructed positions.
To Next Page
Loading...
