6–4 EPM 2200 POWER METER – INSTRUCTION MANUAL
PROGRAMMING USING THE FACEPLATE CHAPTER 6: USING THE METER
Figure 6-3: Typical Wh Reading
The EPM 2200 will continue to scroll through the Parameter Designators, providing
readings until one of the buttons on the front panel is pushed, causing the meter to enter
one of the other MODES.
6.1.4 Main Menu
Push the MENU button. The MAIN MENU screen appears.
•The Reset mode (rSt) appears in the A window. Use the Down button to scroll,
causing the Configuration (CFG), and Operating (OPr) modes to move to the A
window.
• The mode that is currently flashing in the A window is the “Active” mode, which
means it is the mode that can be configured.
Figure 6-4: Main Menu Screens
Press the ENTER button from the Main Menu to view the Parameters screen for the mode
that is currently active.
6.1.5 Reset Mode
1. Push ENTER while rSt is in the A Screen and the rSt ALL? no screen appears.
To Next Page
Loading...
