3–2 EPM 2200 POWER METER – INSTRUCTION MANUAL
ANSI INSTALLATION STEPS CHAPTER 3: MECHANICAL INSTALLATION
Figure 3-1: EPM 2200 Mounting Information
Recommended Tools for EPM 2200 Meter Installation:
• #2 Phillips screwdriver, small wrench and wire cutters.
• Mount the meter in a dry location free from dirt and corrosive substances. The meter
is designed to withstand harsh environmental conditions. (See Environmental
Specifications in 2.2 Specifications on page 2–4.)
3.2 ANSI Installation Steps
1. Insert 4 threaded rods by hand into the back of meter. Twist until secure.
2. Slide ANSI 12 Mounting Gasket onto back of meter with rods in place.
3. Slide meter into panel.
DIN
Mounting
Brackets
ANSI Mounting
Rods (screw-in)
To Next Page
Loading...
