6–6 EPM 2200 POWER METER – INSTRUCTION MANUAL
PROGRAMMING USING THE FACEPLATE CHAPTER 6: USING THE METER
.
PASS or FAIL:
2. When all 4 digits have been entered, push ENTER.
If the correct Password has been entered, rSt ALL donE appears and the screen
returns to Auto-Scroll the Parameters. (In other Modes, the screen returns to the
screen to be changed. The left digit of the setting is flashing and the Program (PRG)
LED flashes on the left side of the meter face.)
.
If an incorrect Password has been entered, PASS ---- FAIL appears and the screen
returns to rSt ALL? YES.
.
6.1.7 Configuration Mode
Navigating the configuration mode menu.
1. Press the MENU Button from any of the auto-scrolling readings.
2. Press DOWN to display the Configuration Mode (CFG) string in the A screen.
To Next Page
Loading...
