7–12 EPM 2200 POWER METER – INSTRUCTION MANUAL
USING THE EPM 2200 METER’S WEB INTERFACE CHAPTER 7: COM OPTION B: BACNET MS/TP WITH MODBUS TCP/IP
This web page shows the current power, power factor, accumulated energy, and peak
demand readings from the meter. You can download all of the meter BACnet data by
clicking the Download data.csv button. You will see the following screen:
This screen gives you the option to open or save an Excel file with the BACnet meter data.
•Click Open to open an Excel file with the meter’s BACnet data.
•Click Save to save a copy of the Excel file.
•Click Cancel to close the screen without opening or saving the file.
An example file is shown below:
To Next Page
Loading...
