CHAPTER 7: MODBUS COMMUNICATIONS MODBUS MEMORY MAP
PQM POWER QUALITY METER – INSTRUCTION MANUAL 7–57
ANALOG
INPUT
continued
10A9 Analog Input Alt Relay 0-4 1 --- F29 0=OFF
10AA Analog Input Alt Level 0 to 65000 1 --- F1 0
10AB Analog Input Alt Delay 5 to 6000 5 0.1 x s F1 100=10.0 s
10AC Reserved
10AD Reserved
10AE Reserved
10AF Reserved
Table 7–10: PQM Memory Map (Sheet 41 of 55)
GROUP ADDR
(HEX)
DESCRIPTION RANGE STEP
VALUE
UNITS and
SCALE
FORMAT FACTORY
DEFAULT
Notes:* Data type depends on the Command Operation Code.** Any valid Actual Values or Setpoints address.
*** Maximum Setpoint value represents “OFF”.**** Minimum Setpoint value represents “OFF”.
***** Maximum Setpoint value represents “UNLIMITED”.****** Applicable to older revisions with VFD display only
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
