GE Multilin PQM - S4 ALARMS;CONTROL continued

CHAPTER 9: COMMISSIONING COMMISSIONING
PQM POWER QUALITY METER – INSTRUCTION MANUAL 9–9
S4 ALARMS/CONTROL continued
TOTAL HARMONIC DISTORTION
AVERAGE CURRENT THD RELAY
AVERAGE CURRENT THD LEVEL %
AVERAGE CURRENT THD DELAY sec.
AVERAGE VOLTAGE THD RELAY
AVERAGE VOLTAGE THD LEVEL %
AVERAGE VOLTAGE THD DELAY sec.
FREQUENCY
UNDERFREQUENCY RELAY
UNDERFREQUENCY LEVEL Hz
UNDERFREQUENCY DELAY sec.
OVERFREQUENCY RELAY
OVERFREQUENCY LEVEL Hz
OVERFREQUENCY DELAY sec.
POWER
POWER ALARMS LEVEL BASE UNITS
POSITIVE REAL POWER RELAY
POSITIVE REAL POWER LEVEL kW
POSITIVE REAL POWER DELAY sec.
NEGATIVE REAL POWER RELAY
NEGATIVE REAL POWER LEVEL kW
NEGATIVE REAL POWER DELAY sec.
POSITIVE REACT POWER RELAY
POSITIVE REACT POWER LEVEL kvar
POSITIVE REACT POWER DELAY sec.
NEGATIVE REACT POWER RELAY
NEGATIVE REACT POWER LEVEL kvar
NEGATIVE REACT POWER DELAY sec.
Table 9–1: PQM Setpoints (Sheet 9 of 12)
Courtesy of NationalSwitchgear.com