PACE Pressure Controller User Manual
[EN] English 3 - 1 K0443 Revision A
3Operation
This section contains quick reference charts detailing all the available functions and the set-
up menu.
3.1 Preparation
Make sure the electrical cables and pneumatic pipes comply with the installation
requirements (Ref: Section 2, Installation).
Before use do the following:
1. If necessary, do the maintenance task (Ref: Section 4, Maintenance).
2. For bench-top, single instrument operation do the following:
a. Connect the instrument to the electrical supply.
b. Inspect the pneumatic hoses for damage, ingress of dirt and moisture.
3. Before use, the instrument should be tested.
4. Review and become familiar with the procedure before starting a process on a
component or system.
Note: The touch-screen can be permanently damaged by sharp objects.
To Next Page
Loading...
Need help?
General
