Vent
Nudge resolution
Set-point limits
Slew rate
Control mode
Global set-up
Control set-up
Status
Vent set-up
-
Replaced by Go to Ground when in
aeronautical option.
Exit set-up.
Upper
Lower
Enable/disable
Yes/No Ê
-
Sets set-point
nudge resoultion.
1
st
to 7
th
digit.
-
Linear - Enter units/second
Maximum rate
Toggle between: fast/no overshoot
Active - Continuous control to set-point
Passive - Controls outside user defined band
Gauge - Controls from zero gauge to set-point
see 3.6:-
see 3.9:-
Ê
To Next Page
Loading...
