Chapter 2. Installation
TransPort
®
PT900 User’s Manual 29
2.5.6c Even-Traverse Installations (Spacing>305 mm/12 in.)
(cont.)
2. Place the yoke on the top of the pipe (see Figure 36 below). If the required
transducer spacing is <305 mm/12 in., the yoke chain must be placed
within the clamping fixture as shown.
Figure 36: Yoke Placement On Top of Pipe
3. Wrap the yoke chains around the pipe and secure them to the yoke bracket,
as shown in Figure 37 below.
Figure 37: Yoke Chains Secured
To Next Page
Loading...
