Chapter 3. Initial Setup
52 TransPort
®
PT900 User’s Manual
3.4 Setting Up the PT900 APP (cont.)
7. To connect to a new PT900 transmitter, click SCAN (see red arrow in
Figure 64 below) and the APP will search for all available transmitters via
Bluetooth.
8. After the scan has been completed, any new transmitters which were
found are listed in the
AVAILABLE DEVICES section of the tablet screen (see
red arrow in Figure 64 below). Click on your transmitter to pair it with the
tablet via Bluetooth.
Important: Although Bluetooth is installed in many devices, the PT900 APP is
designed to filter out all devices except those with names of the form
PT900-Mxxxxxxxx.
Figure 64: Available Devices List
To Next Page
Loading...
