24
SHENZHEN GETECH TECHNOLOGY CO., LTD
(Picture 7-12) (Picture 7-13)
“Toggle mix”: If you need to quickly switch the ratio between E0; E1and E2, you can select this
function to switch, see picture (7-14)
(Picture 7-14)
Set the mix ratio print mode that varies with height
First, you need to get the current z-axis coordinate, which can be found on the screen, details see
picture (7-15).
(Picture 7-15)
Choose “Gradient” to set the variable mix ratio, details see picture (7-16).
To Next Page
Loading...
Need help?
General
