Shenzhen Getech Technology Co.,Ltd
27
（Picture 7-13）
A30T has 3 extruders; therefore it can control feeding in and out and heat operation of E0, E1 and
E2.
Clean filament:
Please keep clean to extruder head in order to have long printing time. Avoid plugging, we
suggest keep clean on a regular basis. Click its button, Extruder E0, E1 and E2 will cycle
alternately of feeding to achieve cleaning.
6) Click “Speed” to its interface. See picture (7-14).
（Picture 7-14）
7.2.4 Interface of printing list:
To Next Page
Loading...
