Shenzhen Getech Technology Co.,Ltd
39
（Picture 8-12）
It pops up dialog as picture below (8-13):
（Picture 8-13）
Printer parameters are important to print quality. Customers need to run tests to find the best
parameters for their printers. Here we provide a configuration file for your reference (“Geeetech
A30T PLA high.rcp”). You can import it according to the steps as follows. The following is an
example of parameters for PLA (Picture 8-14):
Click “Print>Import”
（Picture 8-14）
It pops up the dialog as below. See picture (8-15). Choose “Geeetech A30T PLA high.rcp” and
open it.
To Next Page
Loading...
