page | 43
Basic Operation
OSD Menu
5. Select the desired option by using the ◄ or ► keys.
If the Link USB is set to Yes, then the USB will follow the source when switching.
If the Link USB is set to No, then the USB can be routed independently of the
currently selected source.
6. Once the desired option has been selected, press the Esc key.
7. The following message will be displayed:
8. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
9. To return to the previous screen, without making changes, press the Esc key.
Yes No
Save Before Exit?
Esc Back
To Next Page
Loading...
Need help?
General
