Gefen EXT-DVIK-MV-41 User Manual

page | 12
1. Before powering-on the 4x1 DVI KVM Multiview Switcher, make sure all devices and
the power supply are connected, as outlined under Installation (page 7).
2. Press the Main (power) button on the back panel so that the top-portion, marked with
an “I”, is ush with the back panel
3. The Power indicator on the front of the unit will glow solid blue. In addition, both the
Quad display mode and Source 1 buttons will be selected (illuminated), as shown:
Powering the Switcher
Basic OperationBasic Operation
DVI Displays
A
B
3
2
1
4
Computer Sources
Keyboard / Mouse
EXT-DVIK-MV-41
DVI KVM
Multiview Switcher
4x1 DVI KVM Multiview Switcher
Menu/Back
Select
USB
Video B
Audio
USB
USB 1 2 3 4
Solo
Audio
Full PIP Quad
Reset Power
PAP
®
USB USB
Source 1 Source 2 Source 3 Source 4
EXT-DVIK-MV-41
RS-232 In12V DCMain
RS-232 Out
Keyboard Mouse Mic L/R Out Mic L/R In USB Host Mic L/R In USB Host Mic L/R In USB Host Mic L/R In USB Host
Video A DVI-D Video B DVI-D DVI-D In DVI-D In DVI-D In DVI-D In
USB USB
Workstation
Unit is powered
4x1 DVI KVM Multiview Switcher
Menu/Back
Select
USB
Video B
Audio
USB
USB
1 2 3 4
Solo
Audio
Full PIP Quad
Reset Power
PAP
®
USB USB
Source 1 Source 2 Source 3 Source 4
EXT-DVIK-MV-41
RS-232 In12V DCMain RS-232 Out
Keyboard Mouse Mic L/R Out Mic L/R In USB Host Mic L/R In USB Host Mic L/R In USB Host Mic L/R In USB Host
Video A DVI-D Video B DVI-D DVI-D In DVI-D In DVI-D In DVI-D In
USB USB
Workstation
Basic OperationBasic Operation

Gefen EXT-DVIK-MV-41 Specifications

General

Brand	Gefen
Model	EXT-DVIK-MV-41
Category	Switch
Language	English