page | 47
5. Select the desired option by using the ◄ or ► keys.
If the Link Video B is set to Yes, then the display connected to Video B will always
show the currently selected source. This is the default setting.
If the Link Video B is set to No, then this will allow each display (Video A and
Video B) to show a different source.
6. Once the desired option has been selected, press the Esc key.
7. The following message will be displayed:
8. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
9. To return to the previous screen, without making changes, press the Esc key.
Yes No
Save Before Exit?
Esc Back
Basic Operation
OSD Menu
To Next Page
Loading...
