page | 51
5. Select the desired timeout by using the ◄ or ► keys.
The timeout can be set to one of the following values, in seconds: 0, 5, 10, 15, 20,
25, 30, or OFF. To keep the titlebar displayed at all times, set the Titlebar Timeout
value to 0 seconds. To prevent the titlebar from being displayed, set the timeout value
to OFF. The default value is 5 seconds.
6. Once the desired option has been selected, press the Esc key.
7. The following message will be displayed:
8. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
9. To return to the previous screen, without making changes, press the Esc key.
Basic Operation
OSD Menu
Yes No
Save Before Exit?
Esc Back
To Next Page
Loading...
