page | 67
6. Use the ▲ or ▼ keys to select the Load Factory Default option.
7. Press the Enter key.
8. The following message will be displayed:
The No option will be selected by default.
► To continue without resetting the unit to factory-default settings, press the
Enter key.
► To reset the unit to factory-default settings, select the Yes option using
the ◄ or ► key and then press the Enter key.
9. To return to the previous screen, without making changes, press the Esc key.
Basic Operation
OSD Menu
Settings
F1
F2
F3
F4
Full view
PIP view
Quad view
PAP view
Esc
Enter
W S
A D
Exit
Select
Navigate
Change
1280x1024
Keep Ratio
1080P
Wheel
10 Sec
Previous Page
Output Resolution
Shrink Control
EDID Mode
OneClick Switching
PIP Scan Period
Load Factory Default
Main Menu
Information
Exit
Yes No
Esc Back
Load Default Settings?
To Next Page
Loading...
Need help?
General
