150 50940193/DP0415
Checking Tire Pressure
Correct tire pressure should be maintained for all tires to enhance operating stability and
extend tire life. Refer to the above chart for the proper inflation pressure.
When installing tires, be sure they are the same size and style on each side of the loader.
Always replace tires with the same size as the original equipment.
Electrical System
Inspect and check the machine’s electrical
equipment at regular intervals. Defects, such as
loose connections or scorched cables much be repaired before using
the machine.
Only use proper, original equipment fuses with the specified current
rating. Turn off the machine immediately if there are any problems with
the electrical system.
Work on the machine’s electrical system must be performed only by a
trained technician.
Table 18: Tire Inflation Pressures
Tire Size
Inflation Pressure
psi kPa
10.00 x 16.5 10-Ply Severe Duty 65 450
10.00 x 16.5 8-Ply Flotation 60 414
12.00 x 16.5 10-Ply Flotation 65 450
27 x 10.50 x 15 8-Ply 65 450
To Next Page
Loading...
Need help?
General
